Step 5 – Checking Attack IR’s Detection Zone
1) Turn the rotary knob to the Test position. Close the cover
and tighten the thumb screw. Put Attack IR back onto the tree
bracket. (Note: there is a more convenient method to enable
test mode, see Step 7 - Checking your Attack IR for details).
2) Walk back and forth in front of Attack IR. The red LED will
illuminate
when Attack IR’s sensor has detected you. Using
this method you can accurately position your Attack IR as
desired. For more details on how Attack IR’s motion/heat
sensor works see our website, www.cuddeback.com/support.
Step 6 – Arming the Attack IR
Turn the rotary knob to one of the Armed delay settings. These
settings represent the amount of time Attack IR will wait before it
will take
another image. This dwell time prevents multiple images of
the same animal. Here is our recommendation for the various Armed
settings:
a. 15 and 30 seconds – game trails
b. 1 and 3 minutes – scrapes
c. 5 to 30 minutes – food plots or feeders
When first armed, Attack IR will display the indicated delay for
5 seconds and then begin counting down from 45 to 0. When the
counter gets to 0, Attack IR will arm and be ready to record images.
When Attack IR detects a subject and takes a picture a “worm”
will be displayed and the LED will flash red and green – do not
remove the SD card until the LCD and LED are both OFF. After
the image is saved to the SD card the LCD will display the delay
setting and begin counting down. Once the counter reaches 0,
Attack IR is ready to record the next image.
5
Step 7 – Checking Attack IR
When you check Attack IR it is not necessary to turn the rotary
knob. Instead, press the A or B button to temporarily suspend
Armed mode and view pertinent information, such as the number
of images on the SD card and battery level. Each time you press
the A or B button new information will be displayed. Here is the
sequence of information that is displayed each time the A or B
button is pressed.
1) Images on SD card. Note the ARMED, DWELL, and
IMAGES icons are displayed.
2) Free Space on SD card in MB. Note that ARMED and
DWELL icons are displayed.
3) Battery Level as a percentage. For example, bt:99 means
there is 99% battery power left.
4) Time
5) Date
6) Year
7) Test indicates Attack IR is in Test mode and will
illuminate the red Test LED when activity is sensed.
8) Pressing A or B again will Arm the camera and
the current delay setting will be displayed.
You can leave Attack IR in any of the states 1 thru 7 and Attack IR
will automatically re-arm in about 5 minutes. This allows you to
close the cover and leave the area without triggering an image.
Step 8 – More Features
Video Mode
Attack IR can be set to record a 30 second video when it records an
image. Video recording is enabled by moving the Video Switch to
ON. To disable video recording move the switch to OFF. Attack IR
will take an image before it begins recording the video, thus you
do not give up images to get video.
6
(26 páginas)
(64 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais